TheAppleDragon
Mar 2, 10:31 AM
I'm using Lion server.
Call me a noob if you will, but I just can't get my self hosted site to work outside my LAN.
How do I set it up so that others can access it from my co.cc domain?
It's being stored in the WebServer folder I believe, and fed from the .local domain.
Thanks...
Call me a noob if you will, but I just can't get my self hosted site to work outside my LAN.
How do I set it up so that others can access it from my co.cc domain?
It's being stored in the WebServer folder I believe, and fed from the .local domain.
Thanks...
DennisMadsen
May 4, 02:14 PM
I found this page with memory specifications for the new iMac (Mid 2011):
http://support.apple.com/kb/HT4621
I've ordered a 27" with the 3,4Ghz i7 CPU. I would like to do a RAM upgrade from the 4GB to 8GB.
Which RAM will you recommend?
I found these:
http://www.corsair.com/cmso8gx3m2a1333c9.html
Are they fine or should I buy something else?
http://support.apple.com/kb/HT4621
I've ordered a 27" with the 3,4Ghz i7 CPU. I would like to do a RAM upgrade from the 4GB to 8GB.
Which RAM will you recommend?
I found these:
http://www.corsair.com/cmso8gx3m2a1333c9.html
Are they fine or should I buy something else?
snberk103
Mar 26, 01:18 PM
Does anyone know if kaplan prep-course expenses can be included into overall educational expenses?
Also, what about application fees?
Asking specific tax questions on an online forum is just asking for problems.
You should have tax forms from your university. Call them and ask or call the IRS and ask. But asking on an internet forum is a bad idea..
Especially since you haven't even specified which tax jurisdiction you are in. Do you deal with the IRS, CCRA, HMRC, ATO, etc
Federal, State, Provincial, Territorial?
So... let me be the first to say.... "Yes, absolutely. Write it all off." In fact did you know that you can even write off any fizzy soft-drinks you consumed while studying, but not if they were also also caffeinated, unless the calorie count was below the remainder of your net income/# of days you studied x 1.345%. Unless you resided in QC for at least 33 days, in which case you can subtract whatever calories you consumed from poutine from the figure in line 345 above.
Please don't take this advice seriously.... I can not be held responsible for actions taken based on this post.... :D
Also, what about application fees?
Asking specific tax questions on an online forum is just asking for problems.
You should have tax forms from your university. Call them and ask or call the IRS and ask. But asking on an internet forum is a bad idea..
Especially since you haven't even specified which tax jurisdiction you are in. Do you deal with the IRS, CCRA, HMRC, ATO, etc
Federal, State, Provincial, Territorial?
So... let me be the first to say.... "Yes, absolutely. Write it all off." In fact did you know that you can even write off any fizzy soft-drinks you consumed while studying, but not if they were also also caffeinated, unless the calorie count was below the remainder of your net income/# of days you studied x 1.345%. Unless you resided in QC for at least 33 days, in which case you can subtract whatever calories you consumed from poutine from the figure in line 345 above.
Please don't take this advice seriously.... I can not be held responsible for actions taken based on this post.... :D
TonyK
May 1, 06:57 AM
There are other issues besides your maximum DL speed or that of the source. Your or their ISP could throttle download speeds for any number of reasons.
Then there is the issue of "hops", meaning how many points between you and the source it takes to make the connection and their capabilities.
Then there is the issue of "hops", meaning how many points between you and the source it takes to make the connection and their capabilities.
wordoflife
Apr 14, 11:36 PM
Haha:D
cfsporn
Apr 7, 10:58 PM
I have a 4 GB iPhone that is jailbroken and unlocked. I wasn't planning to sell, but if an offer is made, I would seriously think about it.
celticpride678
Oct 20, 07:47 PM
facebook button is relatively new. we had it, but it was causing problems (slow load times), so we switched to a different version, which does look different.
arn
The Like button was causing load time issues?
arn
The Like button was causing load time issues?
ethan028
Mar 11, 07:32 AM
You might want to stick with woodfield for the parking. But it would be great to see you guys there :p
Tharian
Apr 13, 11:56 AM
I haven't, but I did consider it after graduation last year.
While I worked for Apple retail in college I actually got to meet a young lady going through this program and I spoke with her about her experience. From what she said, it seems like a truly unique and worthy experience if you are interested in joining Apple in a retail aspect long-term. This could be in a retail store or with Apple's corporate retail division (or so she said).
Looking back, I wish I had applied. A word of caution though, she told me that the acceptance rate is very low at around 2% of applicants. Just a heads up.
Best of luck if you consider and apply for the program!
-d
While I worked for Apple retail in college I actually got to meet a young lady going through this program and I spoke with her about her experience. From what she said, it seems like a truly unique and worthy experience if you are interested in joining Apple in a retail aspect long-term. This could be in a retail store or with Apple's corporate retail division (or so she said).
Looking back, I wish I had applied. A word of caution though, she told me that the acceptance rate is very low at around 2% of applicants. Just a heads up.
Best of luck if you consider and apply for the program!
-d
BlindMellon
May 5, 08:26 PM
I want the ringer loud for phone calls, but the message alert is too damn loud. anyway to set the volume on text message alerts?
bighabeeb
Apr 13, 08:43 AM
I use Otterbox but I know someone with an Atomic Hybrid Composite case saw it for first time the other day its very light weight and durable.
Anyways I went to the website http://www.atomiciphonecase.com
Looks like they are coming out with an even better model in 2 days called "The Diamondbach". Im going to hold out and see how this looks there isnt much info on it yet but if you go to that website its the 3rd flash picture on the screen.
The picture is just a sketch of it. I want to see actuall pics and a review first before I buy if its like the hybrid but better I will be looking forward to something new my otterbox is just to bulky for iPhone 4.
Diamondback isnt "better" per se, it's a totally different case from the hybrid as it's a full coverage style case, as opposed to the bumper style...
Looks pretty nice though!
Anyways I went to the website http://www.atomiciphonecase.com
Looks like they are coming out with an even better model in 2 days called "The Diamondbach". Im going to hold out and see how this looks there isnt much info on it yet but if you go to that website its the 3rd flash picture on the screen.
The picture is just a sketch of it. I want to see actuall pics and a review first before I buy if its like the hybrid but better I will be looking forward to something new my otterbox is just to bulky for iPhone 4.
Diamondback isnt "better" per se, it's a totally different case from the hybrid as it's a full coverage style case, as opposed to the bumper style...
Looks pretty nice though!
italeki
May 1, 08:50 AM
I took the cover off and only one popup, so thats good. Thanks!!!
Queso
Mar 27, 04:39 PM
Do i have to sign up somewhere?
Go into the F@H client preferences, and under the identity tab type your nickname and 3446 as the team number. After you complete the first WU you'll start showing up on the team stats :)
Go into the F@H client preferences, and under the identity tab type your nickname and 3446 as the team number. After you complete the first WU you'll start showing up on the team stats :)
noht*
Sep 1, 01:21 PM
Says RS/6000.
yeah, but so what?
afaik rs/6000 was a server line at ibm which was rebranded the pSeries some two years ago...but they did/do use ppc processors of various flavors.
what i see from this message is that this patch enables altivec support on the powerpc64 target of the linux64 build of gcc, so if you happen to have a 64-bit powerpc with altivec, try to compile it on your box.
anyway, this might be completly wrong, just trying to show my pov.
noht
yeah, but so what?
afaik rs/6000 was a server line at ibm which was rebranded the pSeries some two years ago...but they did/do use ppc processors of various flavors.
what i see from this message is that this patch enables altivec support on the powerpc64 target of the linux64 build of gcc, so if you happen to have a 64-bit powerpc with altivec, try to compile it on your box.
anyway, this might be completly wrong, just trying to show my pov.
noht
666sheep
May 12, 01:03 PM
Pro Care= earlier incarnation of AppleCare?
Not exactly: http://www.apple.com/retail/procare/
BTW: great find :)
Not exactly: http://www.apple.com/retail/procare/
BTW: great find :)
LethalWolfe
Mar 8, 02:48 AM
Tried disk utility from the OS X disc, tried PRAM, tried permissions again. Nothing.
So...
Just for sh8ts and giggles I went in and selected OS X as my start up disk thru System Preferences and, bingo, Macs boots fine now. :)
Now I just have to get to the bottom of the kernel panics.
Lethal
So...
Just for sh8ts and giggles I went in and selected OS X as my start up disk thru System Preferences and, bingo, Macs boots fine now. :)
Now I just have to get to the bottom of the kernel panics.
Lethal
TorontoLRT
Dec 21, 09:53 AM
Sorry to be slow to respond. Like most Chrome apps, it's just a snippet packaged for the Chrome store that when activated, opens the Macrumors site. It shows up in the main Chrome menu for easy access, instead of in the harder-to-reach bookmarks menu. It's main advantage is in being a better alternative to a Macrumors bookmark for people like me who live in Google's ecosystem and/or use Chrome OS devices.
darkinfero
Jun 22, 08:07 PM
yes i might tomorrow night and plan to ustream it from my iphone all the walll till I unbox the phone.
MacBytes
Jun 29, 11:43 AM
http://www.macbytes.com/images/bytessig.gif (http://www.macbytes.com)
Category: News and Press Releases
Link: iPhone Antenna Problem Fuels Nokia (http://www.macbytes.com/link.php?sid=20100629124322)
Description:: none
Posted on MacBytes.com (http://www.macbytes.com)
Approved by Mudbug
Category: News and Press Releases
Link: iPhone Antenna Problem Fuels Nokia (http://www.macbytes.com/link.php?sid=20100629124322)
Description:: none
Posted on MacBytes.com (http://www.macbytes.com)
Approved by Mudbug
AUrunna
Feb 20, 11:11 AM
Ok, I hope some of the experts out there can help me out.
I'm using photoshop to make some high quality posters that I'm going to print out using our university printers (very nice, archival paper, etc.), and I want to be sure I'm doing everything I can do ensure the highest quality I can.
So this is what happened, I started making these posters with no intent to print them at first, and so I made them 10"x6.67" at like 150 DPI. NOW, I want to print them at 18"x12" and also at the original smaller size. Also in these posters it's pretty much just text and shapes made using the shape tool, some textures, etc. Here are some of the one's I've done up to now to give you an idea of what I'm working with:
https://lostindesign1.wordpress.com/
I have a variety of questions:
1. Is it true that if I just go into the current file and change it to 18x12 at 300dpi, it won't actually be that quality? I've heard this is true.
2. Would it be best to make a new file at 18x12, 300dpi, and then import everything from the old file, or simply make them new again? (NOTE: I have no real objection making them new if it will make it nicer, also, there's a lot of things I actually want to change with them so I wouldn't mind starting from scratch).
3. Going off of that question, let's say I make an 18x12, and I want to print a 10x6.67, could I just decrease image size, save it in a printable form, and that won't affect quality?
4. That reminds me, what is the best format to print from? I know not JPG, but maybe TIFF? not really sure here.
4. When using these shapes and texts, should I rasterize them once I'm ready to print, or does that not matter? Or is there something else I should be doing? I'm confused about this whole rasterizing thing.
Sorry for the boatload of random questions, I just want to be sure I'm getting high quality stuff here when I print these, as I'm going to be giving some as gifts and I just want them to look nice around my apartment.
Thanks to everyone who helps out!
I'm using photoshop to make some high quality posters that I'm going to print out using our university printers (very nice, archival paper, etc.), and I want to be sure I'm doing everything I can do ensure the highest quality I can.
So this is what happened, I started making these posters with no intent to print them at first, and so I made them 10"x6.67" at like 150 DPI. NOW, I want to print them at 18"x12" and also at the original smaller size. Also in these posters it's pretty much just text and shapes made using the shape tool, some textures, etc. Here are some of the one's I've done up to now to give you an idea of what I'm working with:
https://lostindesign1.wordpress.com/
I have a variety of questions:
1. Is it true that if I just go into the current file and change it to 18x12 at 300dpi, it won't actually be that quality? I've heard this is true.
2. Would it be best to make a new file at 18x12, 300dpi, and then import everything from the old file, or simply make them new again? (NOTE: I have no real objection making them new if it will make it nicer, also, there's a lot of things I actually want to change with them so I wouldn't mind starting from scratch).
3. Going off of that question, let's say I make an 18x12, and I want to print a 10x6.67, could I just decrease image size, save it in a printable form, and that won't affect quality?
4. That reminds me, what is the best format to print from? I know not JPG, but maybe TIFF? not really sure here.
4. When using these shapes and texts, should I rasterize them once I'm ready to print, or does that not matter? Or is there something else I should be doing? I'm confused about this whole rasterizing thing.
Sorry for the boatload of random questions, I just want to be sure I'm getting high quality stuff here when I print these, as I'm going to be giving some as gifts and I just want them to look nice around my apartment.
Thanks to everyone who helps out!
Siggen
Apr 16, 06:14 AM
Open up app store on your iPad, go into Featured, the scroll all the way down, click account and logh out.
Edit:
This has nothing to do with jailbreaking. It has to do with you and your friend connecting your iDevices to each others computers, and actually syncing or something. This may also happen if you activate the iDevice with someone elss computer and other things.
Edit:
This has nothing to do with jailbreaking. It has to do with you and your friend connecting your iDevices to each others computers, and actually syncing or something. This may also happen if you activate the iDevice with someone elss computer and other things.
mac jones
May 3, 07:09 PM
My advise to you is just get rid of the drive. This cable swapping is pathetic, and is no guarantee of anything.
Ebay is your friend (well maybe not your 'friend',....)
Ebay is your friend (well maybe not your 'friend',....)
trfjason
Jun 3, 10:21 PM
Hi, I just received my iPod Touch 2G 8GB today, after connecting the cable few times, I parts of the connector chipped off. Is this normal?
spamdumpster
May 3, 01:48 PM
I'm noticing the same thing - jerky animation, delays with typing. No new packages from the ones I had with all previous 4.x.x. Strange.